Table 163: Show Service-Management Owner-Session Output Fields - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide
-----------------------
tiered(2000000,3000000)
To display information for a particular owner with service session information:
host1# show service-management owner-session aaa 4194326 service-session
User Name: client1@isp.COM, Interface: ip192.168.0.1
Service : tiered(2000000,3000000)
Table 163 on page 726 lists the show service-management owner-session command
Meaning
output fields.

Table 163: show service-management owner-session Output Fields

726
Monitoring Active Owner Sessions with Service Manager
Non-volatile : False
Owner : AAA 4194326
State : Config ApplySuccess
Activate : True
Statistics Type : time-based and volume-based
Statistics Complete : False
Poll Interval : 0
Poll Expire : 0
Activate Time : THU MAR 02 01:21:26 2006
Time : 0
Time Expire : 0
Volume MBytes: 2
Volume Expire MBytes : 1
Input Bytes : 594
Output Bytes : 1196
Input Packets : 1
Output Packets : 2
Field Name
Name
Interface
Owner/Id
State
Non-volatile
Service Sessions
Operation
Service
Activate
------------
False
Field Description
Name of the subscriber or name of the service session
Type and IP address of the subscriber's interface
Method used to activate the subscriber session (CLI,
AAA) and ID number generated by the owner
Status of the subscriber session (active or inactive),
or status of the service session
Indicates whether the service session is stored in
NVS; RADIUS-based service sessions are not stored
in NVS
Number of service sessions currently active for this
subscriber
Last operation that Service Manager performed
Name of the service, with parameter values in
parentheses
Indicates whether the last operation was activate
(True) or deactivate (False)