Table 143: Modifying Qos Configurations With Other Sources - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

Table 143: Modifying QoS Configurations with Other Sources

QoS Profile
Attachment
Service
Manager
RADIUS
SNMP
SRC software
CLI
The following sections describe the precedence of each source when modifying
configurations.
Service Manager
QoS profile attachments and parameter instances created through Service Manager
have precedence over all other sources. For example, Service Manager can overwrite
a QoS profile attachment modified through RADIUS, SNMP, the SRC software, or the
CLI.
Conversely, Service Manager configurations can be overwritten through SNMP, the
SRC software, and the CLI, but not by RADIUS.
Service Manager counts references of parameter instances. You can modify parameter
instances created by Service Manager using other sources without affecting the
reference counts. For more information, see "QoS Statistics" on page 659.
RADIUS
QoS profile attachments and parameter instances configured through RADIUS can
overwrite QoS profile attachments and parameter instances configured through the
SNMP, the SRC software, and the CLI, but not those created by Service Manager.
Conversely, QoS profiles and parameter instances configured through RADIUS can
be overwritten by any source (SNMP, the SRC software, CLI, and Service Manager).
SNMP, the SRC Software, and the CLI
QoS profile attachments and parameter instances configured through the CLI can
overwrite QoS profile attachments and parameter instances configured through any
source.
QoS profiles attached through SNMP and the SRC software can also overwrite QoS
profile attachments configured through any source.
Chapter 27: Configuring Service Manager
QoS Parameter
Instances
–
–
Referencing QoS Configurations in Service Definitions
657