[82] Tunnel-Assignment-Id; [83] Tunnel-Preference; [87] Nas-Port-Id - Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual

JUNOSe 11.1.x Broadband Access Configuration Guide
Related Topics

[82] Tunnel-Assignment-Id

Use the following command to manage the Tunnel-Assignment-Id RADIUS attribute.
radius include tunnel-assignment-id

[83] Tunnel-Preference

Use the following command to manage the Tunnel-Preference RADIUS attribute.
radius include tunnel-preference

[87] NAS-Port-Id

Use the following commands to manage and show information for the NAS-Port-Id
RADIUS attribute.
214
CLI Commands Used to Modify RADIUS Attributes
Monitoring the Connect-Info RADIUS Attribute on page 307
radius include tunnel-assignment-id
Use to include the Tunnel-Assignment-Id attribute in Acct-Start or Acct-Stop
messages.
You can control inclusion of the Tunnel-Assignment-Id attribute by enabling or
disabling this command.
See radius include
Example
host1(config)#radius include tunnel-assignment-id acct-stop enable
Use the no version to restore the default, enable.
radius include tunnel-preference
Use to include the Tunnel-Preference attribute in Acct-Start or Acct-Stop messages.
You can control inclusion of the Tunnel-Preference attribute by enabling or
disabling this command.
See radius include
Example
host1(config)#radius include tunnel-preference acct-start enable
Use the no version to restore the default, enable.
aaa intf-desc-format include
radius include nas-port-id