Table of Contents
Advertisement
include dsl-forum-attributes" on page 238 to enable inclusion of the DSL Forum VSAs
in these AAA messages, the router includes all of the attributes listed in Table 42 on
page 189 in the specified message, provided that the VSA is available in the information
that the router receives from the digital subscriber line access multiplexer (DSLAM).
NOTE: JUNOSe Software also supports several Juniper Networks VSAs that you can
use to include DSL-related information. See "Juniper Networks VSAs" on page 265 .
Table 42 on page 189 lists the DSL Forum VSAs supported by JUNOSe Software in
Access-Request, Acct-Start, Acct-Stop, (if Acct-Stop is specified) Interim-Acct, and
CoA-Request messages. JUNOSe Software uses the vendor ID assigned to the DSL
Forum (3561, or DE9 in hexadecimal format) by the Internet Assigned Numbers
Authority (IANA).
For information about configuring inclusion of the DSL Forum VSAs, see "DSL Forum
Vendor-Specific Attributes" on page 237. For a detailed description of the DSL Forum
VSAs supported by JUNOSe Software, see "DSL Forum VSAs" on page 276 .
Table 42: DSL Forum (Vendor ID 3561) VSAs Supported in AAA Access and Accounting
Messages
Attribute
Number
Attribute Name
[26-1]
Agent-Circuit-Id
[26-2]
Agent-Remote-Id
[26-129]
Actual-Data-Rate-Upstream
[26-130]
Actual-Data-Rate-Downstream
[26-131]
Minimum-Data-Rate-Upstream
[26-132]
Minimum-Data-Rate-Downstream
[26-133]
Attainable-Data-Rate-Upstream
[26-134]
Attainable-Data-Rate-Downstream
[26-135]
Maximum-Data-Rate-Upstream
[26-136]
Maximum-Data-Rate-Downstream
[26-137]
Minimum-Data-Rate-Upstream-Low-Power
[26-138]
Minimum-Data-Rate-Downstream-Low-Power
[26-139]
Maximum-Interleaving-Delay-Upstream
[26-140]
Actual-Interleaving-Delay-Upstream
[26-141]
Maximum-Interleaving-Delay-Downstream
Chapter 3: Configuring RADIUS Attributes
Access-Request
Acct-Start
DSL Forum VSAs in AAA Access and Accounting Messages
Acct-Stop
Interim-Acct
CoA-Request
–
–
–
–
–
–
–
–
–
–
–
–
–
189
Advertisement
Table of Contents
Troubleshooting
