Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 787

packet fragmentation.................................................337
packet mirroring........................................................245
packets
demultiplexing....................................................603
transmitting........................................................335
Partition-Accounting-Off messages.............................181
Partition-Accounting-On messages.............................181
password command...................................362, 365, 593
PCR (RADIUS attribute 26-15)....................................222
peer...........................................................................337
peer resynchronization..............................................391
performance impact
IPv4 and IPv6 services
in a dual stack, combined............................671
in a dual stack, independent........................671
persistent tunnels, creating........................................385
PIB (Policy Information Base).......................................94
platform considerations
PPP.....................................................................321
Point-to-Point Protocol. See PPP
Policy Information Base. See PIB
policy management on subscriber interfaces.............607
PPP (Point-to-Point Protocol)
accounting statistics for tunneled sessions..........408
B-RAS service support.............................................5
platform considerations......................................321
ppp commands
ppp aaa-profile................................................68, 76
PPPoE remote circuit ID.............................................501
Pppoe-Description (RADIUS attribute 26-24)..............224
pre-authenticate command..........................................81
preauthentication
AAA LLID..............................................................76
B-RAS users............................................................9
preference..................................................................370
preference command.........................................362, 365
preference order
in allocation of prefixes
to IPv6 clients..............................................106
in assignment of DNS addresses
to IPv6 clients..............................................106
in determining local address pool
for allocation of IPv6 prefixes......................106
preferred lifetime
for delegated prefixes
configuring..................................................108
default.........................................................108
setting
without expiration.......................................108
Prefix Delegation See DHCPv6 Prefix Delegation
prefixes
allocated to clients from
interface configuration.................................106
IPv6 local address pools...............................106
RADIUS Access-Accept message..................106
assigned length of /128
in IPv6 local address pools...........................105
assigning to
DHCPv6 clients............................................107
configuring ranges
for delegation to clients...............................107
delegating by
DHCPv6 local server....................................107
delegating to clients
over non-PPP links.......................................104
over PPP links..............................................104
excluded from
delegation to clients.....................................108
excluding
range and individual ones ...........................108
in Access-Accept messages
applicable RADIUS attributes.........................60
for DHCPv6 Prefix Delegation........................60
priority over prefix in local address pool........60
limitation on
number assigned to clients..........................109
order of preference
in allocation to clients..................................106
preferred and valid lifetimes
configuring for delegated ones.....................108
prerequisite
for configuring IPv6 local address pools
for Prefix Delegation....................................107
primary authentication/accounting RADIUS
server.................................................................23, 73
primary IP interface...................................................606
privilege authentication, TACACS+...........................317
profile commands
profile.................................................................651
Q
QoS (quality of service)
calculation method for L2TP transmit connect
speed..............................................................402
on subscriber interfaces......................................607
QoS commands
qos-parameter....................................................653
qos-profile...........................................................651
R
RADIUS
LAG subscribers information.................................92
Index
747
Index