Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 629

include hostname
include ip-address
include mac-address
include virtual-router-name
ip auto-configure ip-subscriber
Use the no version to disable inclusion of the suboption in the username.
See include dhcp-option 82
Use to include the router hostname in the username that is dynamically created
by JUNOSe subscriber management.
Example
host1(config-service-profile)#include hostname
Use the no version to disable inclusion of the router hostname in the username.
See include hostname
Use to include the IP address in the username that is dynamically created by
JUNOSe subscriber management.
Example
host1(config-service-profile)#include ip-address
Use the no version to disable inclusion of the IP address in the username.
See include ip-address
Use to include the MAC address identifier in the username that is dynamically
created by JUNOSe subscriber management.
Example
host1(config-service-profile)#include mac-address
Use the no version to disable inclusion of the MAC address in the username.
See include mac-address
Use to include the virtual router name in the username that is dynamically created
by JUNOSe subscriber management.
Example
host1(config-service-profile)#include virtual-router-name
Use the no version to disable inclusion of the virtual router name in the username.
See include virtual-router-name
Chapter 23: Configuring Subscriber Management
Subscriber Management Commands
589