Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 66

JUNOSe 11.1.x Broadband Access Configuration Guide
aaa accounting duplication
aaa accounting immediate-update
aaa accounting interval
26
Configuring RADIUS Authentication and Accounting Servers
radius RADIUS accounting for the specified subscribers.
none No accounting is done for the specified subscribers.
radius none Multiple types of accounting; used in the order specified. For
example, radius none specifies that RADIUS accounting is initially used;
however, if RADIUS servers are not available, no accounting is done.
Example
host1(config)#aaa accounting ppp default radius
Use the no version to set the accounting protocol to the default, radius.
See aaa accounting default
Use to enable AAA duplicate accounting on a virtual router. Specifies that duplicate
accounting records be sent to the accounting server on another virtual router.
Example
host1(config)#aaa accounting duplication routerBoston
Use the no version to disable the feature.
See aaa accounting duplication
Use to send an accounting update to the accounting server immediately on
receipt of a response for an Acct-Start message.
Use the enable keyword to enable immediate updates. Use the disable keyword
to disable immediate updates. Immediate updates are disabled by default.
Example
host1(config)#aaa accounting immediate-update enable
Use the no version to restore the default condition, disabling immediate updates.
See aaa accounting immediate-update