Juniper JUNOSE 11.1.X - BROADBAND ACCESS CONFIGURATION GUIDE 6-4-2010 Configuration Manual page 366

JUNOSe 11.1.x Broadband Access Configuration Guide
aaa new-model
accounting
line
326
Configuring TACACS+ Support
Use the no version to remove the authentication list from your configuration.
See aaa authentication login
Use to specify AAA new model as the authentication method for the vty lines on
your router.
If you specify AAA new model and you do not create an authentication list, users
will not be able to access the router through a vty line.
Example
host1(config)#aaa new-model
Use the no version to restore simple authentication (login and password).
See aaa new-model
Use to specify accounting method lists used on a console or vty line. Consoles
and lines are initially configured with the default method list for all accounting
service types (for example, Exec, Commands).
Specify exec to capture accounting information for User Exec terminal sessions
or commands to capture accounting information for User Exec mode commands
at the indicated JUNOSe privilege level (0 through 15).
Specify the name of the method list to be applied to the line or console.
To disable accounting for a line or console, specify a nonexisting accounting
method list name (for example, noAccounting).
Example
host1(config)#accounting commands 12 listY
Use the no version to restore the default method list.
See accounting
Use to open or configure console or vty lines.
You can specify a single line or a range of lines. The range is 0 though 29 for vty
lines, 0 for the console line.
Example
host1(config)#line vty 6 10
host1(config-line)#
Use the no version to remove a line or a range of lines from the configuration.
Lines that you remove will no longer be available for use by telnet, FTP, or SSH.
When you remove a vty line, the router removes all lines above that line. For