Overview; Pc Setup Settings - Omron CQM1H-SCB41 Operation Manual

Overview

3-1 Overview
Backup
battery
3-2

PC Setup Settings

28
The following settings, control bits, flags, and information are available in the
CPU Unit memory for use with the Serial Communications Board.
Contents
PC Setup settings for the Serial Communi-
cations Board
Control bits, flags, and status information for
the Inner Board slot 1
Error flags and information for Inner Boards SR 25415: Inner Board Error Flag
CPU Unit
PC Setup settings
(DM 6550 to DM 6559)
Read
constantly
Inner Board Slot 1
Area
(IR 200 to IR 207) Refreshed
Inner Board Error Flag
and Error Code
(SR 25415 and AR 04)
Settings for the Serial Communications Board can be made from a Program-
ming Device in the following words of the PC Setup.
Port 1: DM 6555 to DM 6559
Port 2: DM 6550 to DM 6554
The settings stored in these words are read constantly; the PC does not need
to be restarted or reset when changes are made to the settings. They will be
updated automatically as soon as they are changed.
The settings in these words depend on the serial communications mode that
is being used. Refer to the following sections for details.
Host Link:
Protocol macros: SECTION 5 Protocol Macros
No-protocol:
1:1 Data Links:
NT Links:
An overview of the PC Setup settings for the Serial Communications Board is
given next. The default setting for each word is all zeros (0000).
Port 1: DM 6555 to DM 6559
Port 2: DM 6550 to DM 6554
IR 200 to IR 207
AR 04:
CX-Protocol (for protocol
macro mode operation)
Serial Communications Board
Flash memory
Protocol macro
data (for protocol
macro mode
operation)
SECTION 4 Host Link Communications
SECTION 6 No-protocol Communications
SECTION 7 Communications for 1:1 Data Links
SECTION 8 NT Link Communications
Section 3-1
Addresses
Inner Board Error Code
Protocol
macro data