Omron CQM1H-SCB41 Operation Manual page 354

3Z4L Laser Micrometer Protocol
Note This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.
Automatic Detection Set (3000-series, High-speed Type)
(Sequence No. 427)
This sequence sets the work automatic detection function.
Send Data Word Allocation (2nd Operand of PMCR)
Receive data
storage words
Receive Data Word Allocation (3rd Operand of PMCR)
None.
Note This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.
Automatic Detection Release (3000-series, High-speed Type)
(Sequence No. 428)
This sequence releases the setting of work automatic detection function.
Send Data Word Allocation (2nd Operand of PMCR)
None.
Receive Data Word Allocation (3rd Operand of PMCR)
None.
Note This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.
Automatic Detection List Request (3000-series, High-speed
Type) (Sequence No. 429)
This sequence requests the settings of work automatic detection function.
Send Data Word Allocation (2nd Operand of PMCR)
None.
+0 Number of send data words
(Undefined) The number of measuring times
+1
+2
Invalid time
+3
Decimal portion
Integer portion
+4
(Undefined)
+5
Sign
+6
Decimal portion
+7
(Undefined)
Sign
+8
Offset Contents (data format)
+0 Number of send data words
(4 digits BCD)
+1 Number of measurements
(3 digits BCD)
+2 Invalid time (4 digits BCD)
+3 Detection lower limit (deci-
mal portion)
(4 digits BCD)
+4 Detection lower limit (integer
portion)
(3 digits BCD)
+5 Detection lower limit (Sign)
(ASCII 1 character)
+6 to +8 Detection upper limit
Detection lower limit
(Undefined)
Detection upper limit
Integer portion
(Undefined)
0009 (fixed)
001 to 999
0001 to 9999
0000 to 9999
000 to 999
If +: 20 (' ')
If – : 2D ('–')
Same as detection lower limit
Appendix K
Data
Example 123.4567
+3 4 5 6 7
+4 0 1 2 3
+5 2 D 0 0
339