Omron CQM1H-SCB41 Operation Manual page 340

3Z4L Laser Micrometer Protocol
Memory Switch Set (Sequence No. 401)
This sequence sets memory switches and the area for the work position LED.
Send Data Word Allocation (2nd Operand of PMCR)
First word of send
data
Receive Data Word Allocation (3rd Operand of PMCR)
None.
mm Unit Set (Sequence No. 402)
This sequence sets the display unit to mm.
Send Data Word Allocation (2nd Operand of PMCR)
None.
Receive Data Word Allocation (3rd Operand of PMCR)
None.
Note This sequence can be used for the 3Z4L-4000 Series only when pin 8 on DIP switch SW2 is turned ON.
E Unit Set (Sequence No. 403)
This sequence sets the display unit to E.
Send Data Word Allocation (2nd Operand of PMCR)
None.
Receive Data Word Allocation (3rd Operand of PMCR)
None.
Note This sequence can be used for the 3Z4L-4000 Series only when pin 8 on DIP switch SW2 is turned ON.
+0 Number of send data words
+1 W X Y
(Undefined)
+2
Offset Contents
(data format)
+0 Number of send data
words (4 digits BCD)
+1 w (1 digit BCD)
x (1 digit BCD)
y (1 digit BCD)
z (1 digit BCD)
+2 v (1 digit BCD)
Z
V
Data
3000-series
0003 (fixed)
Using buzzer sound: 0 to 3
Automatic latch release time:
0 to 9
Using print timer, the setting
for simultaneous measure-
ment: 0 to 3 (high-speed), 0
to 1 (other)
Display of the comma for 1/
1000s digit, number of
display digits: 0 to 5 (high-
speed), 0 to 3 (other)
Measurement interval 4: 0 to
6
Appendix K
4000-series
0003 (fixed)
Number of digits for extin-
guishing indicator: 0 to 2
I/O IF RUN Input: 0 or 1
Display of Err-0: 0 or 1
Averaging method: 0 to 2
(high-speed), 0 (other)
Use of comma: 0 or 1
325