Omron CQM1H-SCB41 Operation Manual page 202

E5@K Digital Controller Write Protocol
Switch to Level 1 (Sequence No. 075)
Switches the setting level to level 1 (setup mode, extended mode). This sequence can be executed for multiple
units.
Send Data Word Allocation (2nd Operand of PMCR)
First word of
send data
Receive Data Word Allocation (3rd Operand of PMCR)
None.
Software Reset (Sequence No. 076)
Resets the operation of the E5@K (equivalent to turning on the power supply). This sequence can be executed
for multiple units.
Send Data Word Allocation (2nd Operand of PMCR)
First word of
send data
Receive Data Word Allocation (3rd Operand of PMCR)
None.
Note Communications with the E5@K are disabled for about five seconds after this sequence is executed.
+0 Number of send data words
+1
Number of units
+2 (Undefined)
(Undefined)
+3
~
+9 (Undefined)
Offset Contents (data format)
+0 Number of send data words
(4 digits BCD)
+1 Number of units (4 digits BCD)
+2 to 9 Unit No. (2 digits BCD)
+0
Number of send data words
+1
Number of units
+2 (Undefined)
Unit No.
+3 (Undefined)
Unit No.
~
(Undefined)
Unit No.
+9
Offset Contents (data format)
+0 Number of send data words
(4 digits BCD)
+1 Number of units (4 digits BCD)
+2 to 9 Unit No. (2 digits BCD)
Unit No.
Unit No.
~
Unit No.
(max.)
Number of units + 2
0001 to 0008
00 to 31
~
(max.)
Number of units + 2
0001 to 0008
00 to 31
Appendix D
Data
Data
187