Omron CQM1H-SCB41 Operation Manual page 314

K3T@ Intelligent Signal Processor Protocol
Read Set Value O3 with Bank (Continuous Units)
(Sequence No. 329)
This sequence reads set value O3 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O2 with Bank (Continuous Units)
(Sequence No. 330)
This sequence reads set value O2 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Set Value O1 with Bank (Continuous Units)
(Sequence No. 331)
This sequence reads set value O1 of a bank not in use for continuous units. The word allocation is identical to
that of sequence No. 323 (Read Set Value HH with Bank (Continuous Units)).
Read Holding Data (Sequence No. 332)
Reads the peak/bottom data (maximum, minimum) and stores the results in the specified words.
Send Data Word Allocation (2nd Operand of PMCR)
First word of
send data
+0
Number of send data words
(Undefined)
+1
Number of units
+2
(Undefined) Relevant unit No.
+3 Operand
~
+64
(Undefined) Relevant unit No.
+65
Operand
Offset Contents (data format)
+0 Number of send data words
(4 digits BCD)
+1 Number of units (2 digits BCD)
+2 Relevant unit No. (2 digits BCD)
+3 Operand (ASCII 2 characters)
+65 Operand (ASCII 2 characters)
~
0004 to 0066
01 to 32
00 to 99
5048 ("PH")
4248 ("BH")
•
•
•
Same as above
Appendix I
Data
299