Omron CQM1H-SCB41 Operation Manual page 371

Visual Inspection System Protocol
Receive Data Word Allocation (3rd Operand of PMCR)
Receive data
storage words
Note 1. Only one output No. can be designated.
2. Measurement is not performed with this command. The measurement results of the last measure-
ment will be stored in the specified words.
3. This command can acquire only the measurement value of the window No. set by output format.
4. For data 1 and 2 , the receive data is compared with the send data. If the receive data is not the same
as the send data, CIO 28909 (if port A is used) or CIO 28913 (if port B is used) will turn ON.
5. The ranges of measurement values are as follows:
For calibration OFF setting: –2147483.648 to 2147483.647
For calibration ON setting: –9999999.999 to 9999999.999
6. If a measurement value exceeds the range of measurement values when calibration is turned off, un-
expected data is stored in the specified words.
Measurement Execution (F300) (Sequence No. 460)
This sequence carries out one measurement and stores measurement results in the specified words
Send Data Word Allocation (2nd Operand of PMCR)
None.
Receive Data Word Allocation (3rd Operand of PMCR)
Receive data stor-
age words
356
Number of receive data words
+0
(Undefined)
+1 Decimal portion
+2 Integer portion
+3 Sign
0
Offset Content (data format)
+0 Number of receive data words
(4 digits BCD)
+1 to Measurement value (decimal por-
+3 tion) (3 digits BCD)
Measurement value (integer por-
tion) (7 digits BCD)
Measurement value (sign)
(1 digit)
Number of receive data words
+0
(Undefined)
+1
(Undefined)
+2
+3
+4
Integer portion
Sign
+5 0
+6 Decimal portion
+7 Integer portion
Sign
+8 0
Decimal portion
+9
Integer portion
+10
Sign
+11 0
+12
Decimal portion
+13
Integer portion
Sign
+14 0
+15
Decimal portion
Integer portion
+16
Sign
+17
0
Measurement value
0004
Example
123.456
+3
+4
+5
Window No.
Evaluation
result
Decimal portion
Appendix L
Data
Example
+123.456
3456 +3 3456
0012 +4 0012
+5
F000 0000
F is stored for negative values.
Data 1
Data 2
Data 3
Data 4
Data 5