Fan Tray Status Leds - Juniper EX9253 Hardware Manual

Fan Tray Status LEDs

The LEDs indicating the state of the fan trays are located adjacent to the fan tray slots on the rear panel
of the chassis (see Figure 11 on page 25
Figure 11: Fan Tray Status LEDs
Captive screw
1
—
2 Latch
—
Table 7 on page 25 describes the behavior of the fan tray LEDs.
Table 7: Fan Tray LED
Color State
Green Blinking
On steadily
and Table 7 on page
Status LED
3
—
Description
Fan tray hardware initialization is complete and software initialization is
pending.
Fan tray software initialization is complete and the fan is functioning
normally.
25).
25