Chassis Status Leds On Ex4300 Switches - Juniper EX4300 Series Hardware Manual

Chassis Status LEDs on EX4300 Switches

EX4300 switches except EX4300-48MP and EX4300-48MP-S switches have three chassis status LEDs
(labeled ALM, SYS, and MST) on the right of the LCD panel, next to the Menu and Enter buttons (see
Figure 26 on page 69). EX4300-48MP and EX4300-48MP-S switches have three chassis status LEDs
(labeled ALM, SYS, and MST) on the right of the front panel (see
Figure 26: Chassis Status LEDs in EX4300 Switches Except EX4300-48MP and EX4300-48MP-S
Switches
1 LCD panel
—
2 LCD panel Enter button
—
Figure 27: Chassis Status LEDs in EX4300-48MP and EX4300-48MP-S Switches
1 Chassis status LEDs
—
Table 18 on page 70 describes the chassis status LEDs on an EX4300 switch, their colors and states,
and the status they indicate. You can view the colors of the three LEDs remotely through the CLI by
issuing the operational mode command show chassis led.
Figure 27 on page
3 LCD panel Menu button
—
4 Chassis status LEDs
—
69).
69