4
Parts Replacement and Cleaning > Disassembly/Assembly - Image Formation System - > Removing the Toner Bottle Mount (CL)
Removing the Toner Bottle Mount (CL)
Preparation
1) Remove the all Drum Units.
2) Remove the ITB Unit.
3) Turn OFF the power.
4) Remove the Cassette 1.
5) Remove the Front Cover.
6) Remove the Left Cover.
7) Remove the First Delivery Tray.
Procedure
NOTE:
In this procedure, procedure for the Toner Bottle Mount (M) is described. Be sure to
perform the same procedure for (Y) and (C).
CAUTION:
If there is any toner scattering, wipe off the toner.
4
Parts Replacement and Cleaning > Disassembly/Assembly - Image Formation System - > Removing the Toner Bottle Mount (CL)
1) Remove the Toner Cartridge.
2) Remove the Fan Holder Cover.
• 1 Claw
NOTE:
Skip step 2 in the case of the Toner Bottle Mount (C).
3) Remove the Fan Duct 2 in the direction of the arrow.
• 1 Connector
• 2 Screws
• 2 Protrusions
Protrusion
x2
4-58
F-4-84
F-4-85
4-58