Canon imageRUNNER ADVANCE C2030 Service Manual page 378

NOTE:
The following device information is shown at the right top of SST screen.
• IP address
• Model name
• Download mode
4) Select the DCON version to be downloaded and click the "Start" button.
Multiple files of system software can be selected in this step. Selecting SYSTEM
automatically selects the language software that supports the selected system.
6
Troubleshooting > Version upgrade > Version Upgrade via SST > Downloading System Software (in single mode)
F-6-41
F-6-42
6 Troubleshooting > Version upgrade > Version Upgrade via SST > Downloading System Software (in single mode)
NOTE: Download confirmation modes
Download is confirmed in any of the following 2 modes:
• Downloading of the difference only: "Skip the existing versions and confirm whether to
download the downgraded versions"
• Overwrite all versions
Regardless of version upgrade or downgrade, all versions of the system software are
downloaded without the confirmation message.
"Skip the existing versions and confirm whether to download the downgraded versions"
can be selected when the checkbox for SYSTEM is selected. There is no choice but to
select "Overwrite all versions" when the checkbox for SYSTEM is not selected.
NOTE: Checking execution status for download
Once download is started, the process up to the writing process is automatically
executed. You cannot interrupt or add the process in the middle of the operation. The
following confirmation message is displayed when downloading is executed.
5) When download is completed, click the "OK" button.
Return to the main menu screen.
This machine is automatically restarted.
The downloaded system software is written on the FLASH PCB.
6) Enter service mode to check the version.
6-32
F-6-43
6-32