Canon imageRUNNER ADVANCE C2030 Service Manual page 194

2
Process/Operation > MEAP > Setting HTTP port for MEAP application (level 2) > Port setup procedure of HTTP Server
■ Port setup procedure of HTTP Server
1) Start [SERVICE MODE] in Level 2.
2) Press [COPIER] >[Option] > [NETWORK] buttons.
3) Press or button until [MEAP-PN] is shown on the screen. Press [MEAP-PN]
button.
2 Process/Operation > MEAP > Setting HTTP port for MEAP application (level 2) > Port setup procedure of HTTP Server
4) Press the port number to specify on the control panel (the numerical value input in the field
is displayed), and press [OK] button.
5) Check to see that it is reflected in setting field, and turn off the main power, and then,
F-2-258
restart the device.
F-2-259
2-160
F-2-260
F-2-261
2-160