Canon imageRUNNER ADVANCE C2030 Service Manual page 599

COPIER > ADJUST > CCD
50-RG RG clr displc crrct:50% book mod[front]
Lv.1 Details To correct the color displacement (R and G lines) in vertical scanning
direction due to the Scanner Unit (paper front) occurs at 50% Book
mode.
When replacing the CCD Unit/clearing the RAM data of the Reader
Unit, enter the value of service label.
Use case - When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range -256 to 256
Unit 0.001 line
Default value 0
50-GB GB clr displc crrct:50% book mod[front]
Lv.1 Details To correct the color displacement (G and B lines) in vertical scanning
direction due to the Scanner Unit (paper front) occurs at 50% Book
mode.
When replacing the CCD Unit/clearing the RAM data of the Reader
Unit, enter the value of service label.
Use case - When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range -256 to 256
Unit 0.001 line
Default value 0
8
Service Mode > COPIER > ADJUST > CCD
8 Service Mode > COPIER > ADJUST > CCD
COPIER > ADJUST > CCD
100-RG RG clr displc crrct:100% book mod[front]
Lv.1 Details To correct the color displacement (R and G lines) in vertical scanning
direction due to the Scanner Unit (paper front) occurs at 100% Book
mode.
When replacing the CCD Unit/clearing the RAM data of the Reader
Unit, enter the value of service label.
Use case - When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range -256 to 256
Unit 0.001 line
Default value 0
100-GB GB clr displc crrct:100% book mod[front]
Lv.1 Details To correct the color displacement (G and B lines) in vertical scanning
direction due to the Scanner Unit (paper front) occurs at 100% Book
mode.
When replacing the CCD Unit/clearing the RAM data of the Reader
Unit, enter the value of service label.
Use case - When replacing the CCD Unit
- When clearing the RAM data of the Reader Unit
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Caution After the setting value is changed, write the changed value in the
service label.
Display/adj/set range -256 to 256
Unit 0.001 line
Default value 0
8-47
8-47