Canon imageRUNNER ADVANCE C2030 Service Manual page 631

COPIER > ADJUST > HV-TR
TR-PPR7 Sec trns indiv setting paper type: set 7
Lv.2 Details To set the paper type (paper weight) for setting 7.
Setting 7 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV7,
TR-PPR7, TR-CLR7 and TR-DUP7. When this condition is satisfied,
the target current that is set in 2TR-TGT7 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the paper type occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 13
1: Plain paper (65 to 82 g/m2)
2: Thin paper (60 to 64 g/m2)
3: Recycled paper (64 to 82 g/m2)
4: Heavy plain paper (83 to 105 g/m2)
5: Heavy paper 1 (106 to 120 g/m2)/Heavy paper 2 (121 to 163 g/
m2)
6: Heavy paper 3 (164 to 220 g/m2)
7: Coated paper 1 (100 to 163 g/m2)
8: Coated paper 2 (164 to 220 g/m2)
9: Envelope
10: Postcard
11: Transparency
12: Tracing paper
13: Special paper (Bond paper/Textured paper/Labels/Punched
paper)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV7, TR-CLR7, TR-DUP7, 2TR-
TGT7
8
Service Mode > COPIER > ADJUST > HV-TR
8 Service Mode > COPIER > ADJUST > HV-TR
COPIER > ADJUST > HV-TR
TR-PPR8 Sec trns indiv setting paper type: set 8
Lv.2 Details To set the paper type (paper weight) for setting 8.
Setting 8 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV8,
TR-PPR8, TR-CLR8 and TR-DUP8. When this condition is satisfied,
the target current that is set in 2TR-TGT8 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the paper type occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 13
1: Plain paper (65 to 82 g/m2)
2: Thin paper (60 to 64 g/m2)
3: Recycled paper (64 to 82 g/m2)
4: Heavy plain paper (83 to 105 g/m2)
5: Heavy paper 1 (106 to 120 g/m2)/Heavy paper 2 (121 to 163 g/
m2)
6: Heavy paper 3 (164 to 220 g/m2)
7: Coated paper 1 (100 to 163 g/m2)
8: Coated paper 2 (164 to 220 g/m2)
9: Envelope
10: Postcard
11: Transparency
12: Tracing paper
13: Special paper (Bond paper/Textured paper/Labels/Punched
paper)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV8, TR-CLR8, TR-DUP8, 2TR-
TGT8
TR-ENV1 Sec trns indiv setting environment:set 1
Lv.2 Details To set the environment (absolute moisture content) for setting 1.
Setting 1 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV1,
TR-PPR1, TR-CLR1 and TR-DUP1. When this condition is satisfied,
the target current that is set in 2TR-TGT1 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture content: 5.8 g/m3 and less)
2: Normal humidity (5.9 to 15 g/m3)
3: High humidity (15.1 g/m3 and more)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-PPR1, TR-CLR1, TR-DUP1, 2TR-
TGT1
8-79
8-79