Checking After Installation - Canon imageRUNNER ADVANCE C2030 Service Manual

■ Installing the Covers
1) Remove the Slot Cover from the HDD Cover. (The removed Slot Cover will not be used.)
• 2 Claws
x2
2) Install the Rear Upper Cover (Rear Upper Cover 1 and HDD Cover).
3) Close the Waste Toner Cover.
4) Tighten the screws securing the Rear Upper Cover 1 and HDD Cover. (Use the screws
removed in "Removing the Covers" step 1.)
9
Installation > TYPE3:Removable HDD Kit-AE1 Installation Procedure: > Checking after Installation
■ Installing the Removable HDD
1) Install the HDD Case to the HDD Slot Unit.
F-9-287
2) Be sure to request the user to padlock the removable HDD to discourage theft.
Setting after Installation

Checking after Installation

1) Connect the power plug to the outlet.
2) Open the Switch Cover and turn ON the main power switch.
3) Check that the HDD is recognized.
• Select [service mode > COPIER > Display > ACC_STS > HDD], and check that the
manufacturer's name and the model number are displayed.
4) Check that the license is registered.
• Select Check Counter > Device Configuration Information, and check that "HDD" is
displayed.
9 Installation > TYPE3:Removable HDD Kit-AE1 Installation Procedure: > Checking after Installation
9-132
F-9-288
9-132