Canon imageRUNNER ADVANCE C2030 Service Manual page 646

COPIER > FUNCTION > INSTALL
CNT-DATE Set counter send start date to SC server
Lv.1 Details To set the year, month, date, hour and minute to send counter
information to the sales company's server.
This is displayed only when the Embedded-RDS third-party extended
function is available.
Use case When the Embedded-RDS third-party expanded function is available
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range YYYYMMDDHHMM (12 digits)
YYYY: Year, MM: Month, DD: Date, HH: Hour, MM: Minute
Default value 000000000000
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables etc. to the sales company's
server via SOAP protocol
CNT-INTV Set counter send interval to SC server
Lv.1 Details To set the interval of sending counter information to the sales
company's server in a unit of one hour.
This is displayed only when the Embedded-RDS third-party extended
function is available.
Use case - When restarting the potential control after executing COPIER>
OPTION> IMG-FIX> PO-CNT.
- When D-max control conditions are changed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 168 (= 1 week)
Unit 1 hour
Default value 24
Supplement/memo Embedded-RDS: Function to send device information such as the
device counter, failure, and consumables etc. to the sales company's
server via SOAP protocol
8
Service Mode > COPIER > FUNCTION > CCD
8 Service Mode > COPIER > FUNCTION > CCD
COPIER > FUNCTION > INSTALL
BRWS-ACT ON/OFF of service browser
Lv.1 Details To set ON/OFF of service browser.
ON/OFF of service browser switches whenever the main power
switch is turned OFF/ON after execution.
If connection with the UGW server is successful, "OK!" is displayed.
If "NG!" is displayed, execute a communication test using COM-
TEST.
The setting is enabled after reboot. Whether the service browser is
ON or OFF can be checked in COPIER> DISPLAY> USER> BRWS-
STS (1: ON, 2: OFF).
Use case - When using the service browser
- At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution After execution, turn OFF/ON the main power switch. After reboot,
be sure to check the usage status in COPIER> DISPLAY> USER>
BRWS-STS.
Display/adj/set range At normal termination: OK!, At abnormal termination: NG!
Related service mode COPIER> FUNCTION> INSTALL> COM-TEST
COPIER> DISPLAY> USER> BRWS-STS
CDS-CTL Setting of country/area when CDS is used
Lv.1 Details To set the country/area to enable the CDS.
Use case When enabling the CDS
Display/adj/set range CA (Canada), LA (Latin America), HK (Hong Kong) and the country/
area specified in COPIER> OPTION> FNC-SW> CONFIG.
Default value It differs according to the location.
Related service mode COPIER> OPTION> FNC-SW> CONFIG
Supplement/memo CDS: Contents Delivery System
■ CCD
COPIER > FUNCTION > CCD
CCD-ADJ Adjustment of Analog Processor gain
Lv.1 Details To adjust the gain of the Analog Processor of the CCD PCB.
Caution All the values in COPIER> ADJUST> CCD are updated after
execution, so write the updated values in the service label.
Display/adj/set range During operation: ACTIVE, When the operation finished normally:
OK!
Related service mode COPIER> ADJUST> CCD
8-94
T-8-28
8-94