Canon imageRUNNER ADVANCE C2030 Service Manual page 34

1
Features/Specifications > Operation > Service mode > Specifications of User Messages Related to Consumable Parts Features/Specifications
Life
Parts Method to display the part
warning
name counter initialization menu
message
Pickup None Set the service mode
Roller/ (COPIER>OPTION>DSPLY-
Separation SW>PUC1-DSP) to 1.
Roller
(Cassette
1)
Pickup None Set the service mode
Roller (COPIER>OPTION>DSPLY-
(Cassettes SW>PUC2-DSP to PUC4-
2 to 4) DSP) to 1.
Waste Displayed None (The counter is
Toner automatically cleared.)
Container
Drum Unit None (See None (The counter is
*2.) automatically cleared.)
*1: The life warning of the target part is displayed in the Control Panel by setting the
service mode (COPIER>OPTION>DSPLY-SW>FXMSG-SW) (Level 2) to 1.
*2: The life warning of the target part is displayed in the Control Panel by setting the
service mode (COPIER>OPTION>USER>P-CRG-LF) (Level 2) to 1.
*3: To use the ITB replacement mode, set the service mode (COPIER>OPTION>DSPLY-
SW>ITB-DSP) (Level 1) to 1.
Since this operation makes the ITB replacement mode appear in the menu on UI, pressing
the "Start" button starts ITB disengagement operation.
1 Features/Specifications > Operation > Service mode > Specifications of User Messages Related to Consumable Parts Features/Specifications
Place of menu on UI Points to note
Adjustment/
Maintenance > Initialize
After Replacing Parts
> Cassette 1 Pickup
Roller & Separation
Roller
Adjustment/
Maintenance > Initialize
After Replacing Parts >
Cassettes 2 to 4 Pickup
Roller
None
None The ITB needs to
be disengaged
by executing the
ITB replacement
mode before part
replacement. (See
*3.)
T-1-12
1-21
1-21