Voice Guidance Kit-F2
Pre-check
Check the firmware version6 of host nachine before installing this
eqipment and if the version is old, upgrade it with using the Service
Support Tool.
MN-CONT: Ver. 10.XX or later.
Points to note when Installing
• The Color Image Reader is necessary to operate this equipment.
• When installing the equipment, see the 'Combination Table of Accessory Installation'.
9
Installation > Voice Guidance Kit-F2 > Checking the Contents
Checking the Contents
[1] Speaker Unit
[4] Support Plate X 1
[7] Ring Core X 2
[10] Screw
[13] Screw
9
Installation > Voice Guidance Kit-F2 > Checking the Contents
[2] Speaker Unit
(Upper) X 1
(Lower) X 1
[5] Speaker Cable X 1
[8] Cable Face Seal X 1
[11] Screw
(Bind; M3x16) X 1
(Bind; M4x6) X 1
[14] Screw
(Bind; M4x16) X 2
(Bind; M4x20) X 2
Use 1 of them
9-84
[3] Voice Guidance Board
Unit X 1
[6] Cord Guide X 7
Use 4 of them
[9] Card Spacer X 1
[12] Screw
(TP; M3x6) X 4
Use 2 of them
F-9-193
9-84