Canon imageRUNNER ADVANCE C2030 Service Manual page 633

COPIER > ADJUST > HV-TR
TR-ENV6 Sec trns indiv setting environment:set 6
Lv.2 Details To set the environment (absolute moisture content) for setting 6.
Setting 6 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV6,
TR-PPR6, TR-CLR6 and TR-DUP6. When this condition is satisfied,
the target current that is set in 2TR-TGT6 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture content: 5.8 g/m3 and less)
2: Normal humidity (5.9 to 15 g/m3)
3: High humidity (15.1 g/m3 and more)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-PPR6, TR-CLR6, TR-DUP6, 2TR-
TGT6
TR-ENV7 Sec trns indiv setting environment:set 7
Lv.2 Details To set the environment (absolute moisture content) for setting 7.
Setting 7 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV7,
TR-PPR7, TR-CLR7 and TR-DUP7. When this condition is satisfied,
the target current that is set in 2TR-TGT7 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture content: 5.8 g/m3 and less)
2: Normal humidity (5.9 to 15 g/m3)
3: High humidity (15.1 g/m3 and more)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-PPR7, TR-CLR7, TR-DUP7, 2TR-
TGT7
8
Service Mode > COPIER > ADJUST > HV-TR
8 Service Mode > COPIER > ADJUST > HV-TR
COPIER > ADJUST > HV-TR
TR-ENV8 Sec trns indiv setting environment:set 8
Lv.2 Details To set the environment (absolute moisture content) for setting 8.
Setting 8 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV8,
TR-PPR8, TR-CLR8 and TR-DUP8. When this condition is satisfied,
the target current that is set in 2TR-TGT8 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the environment occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 3
1: Low humidity (Absolute moisture content: 5.8 g/m3 and less)
2: Normal humidity (5.9 to 15 g/m3)
3: High humidity (15.1 g/m3 and more)
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-PPR8, TR-CLR8, TR-DUP8, 2TR-
TGT8
TR-CLR1 Sec trns indiv setting color mode: set 1
Lv.2 Details To set B&W/color for setting 1.
Setting 1 is the combination condition of environment, paper type
(paper weight), color mode and feed side that are set in TR-ENV1,
TR-PPR1, TR-CLR1 and TR-DUP1. When this condition is satisfied,
the target current that is set in 2TR-TGT1 is applied to the Secondary
Transfer Outer Roller.
Use case When an image failure that differs due to the color mode occurs
(mottled image/density loss due to excessive transfer/toner scattering
on solid image)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 1 to 2
1: Color mode, 2: B&W mode
Default value 1
Related service mode COPIER> ADJUST> HV-TR> TR-ENV1, TR-PPR1, TR-DUP1, 2TR-
TGT1
8-81
8-81