Canon imageRUNNER ADVANCE C2030 Service Manual page 855

4) Connect the Signal Cable and the Power Cable.
• 1 Connector each
x2
5) Install the Cable Unit.
• 2 Claws of the Cable Unit
• 2 Claws of the HDD Mount Frame
• 1 Boss
CAUTION:
Be sure that the boss is fitted properly.
x4
9
Installation > TYPE2:2.5inch/80GB HDD-E1/HDD Data Encryption Kit-C3 Installation Procedure: > Installation Procedure > Installing the HDD
6) Secure the 2 cables of the Cable Unit with the HDD Cable Holder.
• 3 Connectors
CAUTION:
If there is extra slack of the cables, be sure to tuck them in the Controller Box.
F-9-260
7) Install the HDD Encryption Board.
• 4 Screws (TP; M3x6)
8) Connect the 2 connectors to the HDD Encryption Board.
F-9-261
9 Installation > TYPE2:2.5inch/80GB HDD-E1/HDD Data Encryption Kit-C3 Installation Procedure: > Installation Procedure > Installing the HDD
x3
x9
x4
x2
9-120
F-9-262
F-9-263
9-120