CAUTION: Point to Note at Installation
Be sure to install the Bulkhead Unit with the flat side of the terminal up.
x2
9
Installation > Expansion Bus-F2/ IPSec Board-B2/ Wireless LAN Board-B2 > Installation Procedure > [Checking after Installation]
2) Remove the Wireless LAN Auxiliary Plate. (The removed Wireless LAN Auxiliary Plate will
not be used.)
• 2 Screws (The removed screws will be used in step 3.)
F-9-77
3) Install the Wireless LAN Board Support Plate assembled in step 1 to the Wireless LAN
Board.
• 2 Screws (Use the screws removed in step 2.)
NOTE:
When installing the Wireless LAN Board Support Plate, be sure to place it under the
Wireless LAN Board.
F-9-78
9
Installation > Expansion Bus-F2/ IPSec Board-B2/ Wireless LAN Board-B2 > Installation Procedure > [Checking after Installation]
x2
x2
9-38
F-9-79
F-9-80
9-38