Check Items When Turning Off The Main Power; Installation Outline Drawing; Installation Procedure - Canon imageRUNNER ADVANCE C2030 Service Manual

Check Items when Turning OFF the Main Power

Check that the main power is OFF.
1) Turn OFF the main power switch.
2) Be sure that display in the Control Panel and the lamp of the main power supply are turned
off, then disconnect the power plug.

Installation Outline Drawing

Removable HDD
9
Installation > TYPE3:Removable HDD Kit-AE1 Installation Procedure: > Installation Procedure > Removing the Covers

Installation Procedure

■ Removing the Covers
1) Remove the 2 screws securing the Rear Upper Cover 1 and the HDD Cover. (The removed
screws will be used in step 4 of "Installing the Covers".)
2) Open the Waste Toner Cover.
3) Remove the Rear Upper Covers (Rear Upper Cover 1 and HDD Cover) in the directions of
the arrows.
• 4 Claws
F-9-274
9 Installation > TYPE3:Removable HDD Kit-AE1 Installation Procedure: > Installation Procedure > Removing the Covers
x2
9-127
F-9-275
9-127