2) Replace the separated Rear Upper Cover 2 with the HDD Cover and join the HDD Cover
and the Rear Upper Cover 1.
• 5 bosses
NOTE:
•
Put the HDD Cover and the Rear Upper Cover 1 on a desk and insert the claws keeping
them on the same level.
•
Bend the HDD Cover and the Rear Upper Cover 1 to further insert the claws.
•
Flatten the bent HDD Cover and Rear Upper Cover 1 to fit the claws into the 5 bosses.
9
Installation > TYPE1:2.5inch/80GB HDD-E11 Installation Procedure > Installation Procedure > Installing the Covers
F-9-248
9
Installation > TYPE1:2.5inch/80GB HDD-E11 Installation Procedure > Installation Procedure > Installing the Covers
9-113
F-9-249
9-113