Canon imageRUNNER ADVANCE C2030 Service Manual page 128

2
Process/Operation > Pickup Feed System > Various Controls > Paper Size Detection / Cassette Presence Detection
● Cassette 2
Paper size of the cassette can be automatically detected by adjusting the position of the
guide plate.
The Cassette 1 Size Switch A/B detects the size of the paper set in the cassette. Length and
width are detected according to the ON / OFF combination of switches. As long as standard
paper, both AB type and inch type can be used.
However, size should be found manually on the check screen for the combination of A5-R
and STMT-R or the combination of B5 and EXE.
Size switch A
Width Length
(Width Detection)
1 2
B5 257.0 182.0 OFF ON
EXE 267.0 184.0 OFF ON
K16 270.0 195.0 OFF ON
A5-R 148.5 210.0 ON OFF
A4 297.0 210.0 OFF ON
STMT-R 139.7 215.9 ON OFF
LTR 279.4 215.9 OFF ON
B5-R 182.0 257.0 ON OFF
LTR-R 215.9 279.4 OFF OFF
A4-R 210.0 297.0 OFF OFF
LGL 215.9 355.6 OFF OFF
B4 257.0 364.0 OFF ON
K8 270.0 390.0 OFF ON
A3 297.0 420.0 OFF ON
LDR 279.4 431.8 OFF ON
12x18 304.8 457.2 OFF ON
Also, the cassette presence is detected when the size switch is pushed. (If no switch is
pushed, it is determined as no cassette.)
2 Process/Operation > Pickup Feed System > Various Controls > Paper Size Detection / Cassette Presence Detection
Size switch B
(Length Detection)
3 4 1 2 3 4
ON OFF OFF OFF OFF OFF
ON OFF OFF OFF OFF OFF
ON OFF ON OFF OFF OFF
ON OFF ON ON OFF OFF
OFF OFF ON ON OFF OFF
ON OFF ON ON OFF OFF
ON OFF ON ON OFF OFF
ON OFF OFF ON ON ON
ON OFF ON OFF OFF ON
ON OFF OFF ON ON OFF
ON OFF ON ON OFF ON
ON OFF ON ON ON OFF
ON OFF ON ON ON ON
OFF OFF OFF OFF ON ON
ON OFF OFF OFF ON ON
OFF OFF OFF OFF OFF ON
T-2-54
NOTE:
• A5R/STMTR Original Selection
[Settings/registration] > [Preferences] > [Paper Settings] > [A5R/STMTR Original
Selection]
Setting value Cassette3: A5R, STMTR, Cassette4: A5R, STMTR
• B5/EXEC Original Selection
[Settings/registration] > [Preferences] > [Paper Settings] > [B5/EXEC Original Selection]
Setting value Cassette3: B5, EXEC, Cassette4: B5, EXEC
• Service Mode
(Lv.1) COPIER > OPTION > CST> CSTX-P1 (X: Cassette numbers 2 to 4)
Setting value 0: A5R, 1: STMTR
(Lv.1) COPIER > OPTION > CST> CSTX-P2 (X: Cassette numbers 2 to 4)
Setting value 0: B5, 1: EXEC
2-94
2-94