Canon imageRUNNER ADVANCE C2030 Service Manual page 731

FEEDER > FUNCTION
FEED-CHK Specifying DADF individual feed mode
Lv.1 Details To specify the feed mode for DADF.
Feed operation is activated by FEED-ON.
Use case At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 3
0: 1-sided pickup/delivery operation
1: 2-sided pickup/delivery operation
2: 1-sided pickup/delivery operation (with stamp)
3: 2-sided pickup/delivery operation (with stamp)
Related service mode FEEDER> FUNCTION> FEED-ON
CL-CHK Specifying DADF Operation Clutch
Lv.1 Details To specify the DADF Clutch to be operated.
The Clutch is activated by CL-ON.
Use case At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 1
0: Pickup Clutch (CL1), 1: Registration Clutch (CL2)
Related service mode FEEDER> FUNCTION> CL-ON
CL-ON Operation check of DADF Clutch
Lv.1 Details To start operation check for the Clutch specified by CL-CHK.
Use case At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
The clutch operates for approximately 5 seconds and automatically
stops.
2) Press OK key.
The operation check is completed.
Caution Press OK key again after execution. It stops automatically after
approx. 5 sec; however, it does not finish unless OK key is pressed
(STOP screen does not appear.)
Required time Approx. 5 seconds
Related service mode FEEDER> FUNCTION> CL-CHK
FAN-CHK Specifying DADF Operation Fan
Lv.1 Details To specify the DADF Fan to be operated.
The fan is activated by FAN-ON.
Use case At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 1
0: Fan (FM1), 1: Not used
Related service mode FEEDER> FUNCTION> FAN-ON
8
Service Mode > FEEDER > FUNCTION
8 Service Mode > FEEDER > FUNCTION
FEEDER > FUNCTION
FAN-ON Operation check of DADF Fan
Lv.1 Details To start operation check for the fan specified by FAN-CHK.
Use case At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
The fan operates for approximately 5 seconds and automatically
stops.
2) Press OK key.
The operation check is completed.
Caution Press OK key again after execution. It stops automatically after
approx. 5 sec; however, it does not finish unless OK key is pressed
(STOP screen does not appear.)
Required time Approx. 5 seconds
Related service mode FEEDER> FUNCTION> FAN-CHK
SL-CHK Specifying DADF Operation Solenoid
Lv.1 Details To specify the DADF solenoid to be operate.
The solenoid is activated by SL-ON.
Use case At operation check
Adj/set/operate method Enter the value, and then press OK key.
Display/adj/set range 0 to 1
0: Disengagement Solenoid (SL1)
1: Stamp Solenoid (SL2)
Related service mode FEEDER> FUNCTION> SL-ON
SL-ON Operation check of DADF Solenoid
Lv.1 Details To start operation check for the solenoid specified by SL-CHK.
Use case At operation check
Adj/set/operate method 1) Select the item, and then press OK key.
The unit operates for approximately 5 seconds and automatically
stops.
2) Press OK key.
The operation check is completed.
Caution Be sure to press the OK key again after execution. The operation
automatically stops after approximately 5 seconds, but is not
completed unless the OK key is pressed (STOP is not displayed).
Required time Approx. 5 seconds
Related service mode FEEDER> FUNCTION> SL-CHK
8-179
8-179