Canon imageRUNNER ADVANCE C2030 Service Manual page 907

15) Secure the Signal Cable of the HDD Slot Unit with the HDD Cable Holder.
• 1 Connector
NOTE:
Put the Signal Cable through the left line of the guide and connect it to the connector of
the HDD Encryption Board.
CAUTION:
• Be sure that the cable of the connector does not protrude from the [A] part in order
to prevent the cable from being trapped.
• If the Signal Cable is too long, leave the slack at the [B] part.
x3
9
Installation > 2.5inch/80GB HDD-E1/Removable HDD Kit-AE1/HDD Data Encryption Kit-C3 Installation Procedure > Installation Procedure > Insta
[A]
[B]
F-9-374
9 Installation > 2.5inch/80GB HDD-E1/Removable HDD Kit-AE1/HDD Data Encryption Kit-C3 Installation Procedure > Installation Procedure > Insta
16) Secure the Power Cable of the HDD Slot Unit with the HDD Cable Holder.
• 1 Connector
NOTE:
Put the Power Cable up and then down through the right line of the guide and connect
it to the Power Cable Connector.
x3
9-172
F-9-375
9-172