4
Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Removing the Main Drive Unit > Installing the Main Drive Unit
CAUTION:
• Be sure to check that the 8 shafts are aligned with the shaft holes on the host
machine correctly.
2) Check that the Main Drive Unit is installed correctly, and tighten the 6 screws.
x6
Installing
4
Parts Replacement and Cleaning > Disassembly/Assembly - Laser Control System - > Removing the Main Drive Unit > Installing the Main Drive Unit
NOTE:
When installing a new Main Drive Unit, be sure to remove the 4 Fixation Members 2.
F-4-66
F-4-67
4-52
Fixing Members
F-4-68
4-52