Canon imageRUNNER ADVANCE C2030 Service Manual page 694

COPIER > OPTION > USER
COUNTER3 Setting of software counter 3
Lv.1 Details To set counter type for software counter 3 on the Counter Check
screen.
Use case Upon user/dealer's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: Not registered
Default value The value differs according to the location.
COUNTER4 Setting of software counter 4
Lv.1 Details To set counter type for software counter 4 on the Counter Check
screen.
Use case Upon user/dealer's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: Not registered
Default value The value differs according to the location.
COUNTER5 Setting of software counter 5
Lv.1 Details To set counter type for software counter 5 on the Counter Check
screen.
Use case Upon user/dealer's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: Not registered
Default value 0
COUNTER6 Setting of software counter 6
Lv.1 Details To set counter type for software counter 6 on the Counter Check
screen.
Use case Upon user/dealer's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 999
0: Not registered
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
DATE-DSP Setting of data/time display format
Lv.2 Details To set date/time display format according to the country or region.
After the display format is set with this mode, the order of date is
reflected to the followings: Preferences > Timer/Energy Settings >
Date/Time Settings, and report output.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: YYMM/DD, 1: DD/MMYY, 2: MM/DD/YY
Default value The value differs according to the location.
Related user mode Preferences > Timer/Energy Settings > Date/Time Settings
MB-CCV Control card usage limit for Mail Box
Lv.2 Details To restrict use of control card for Mail Box.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Unlimited, 1: Limited
Default value 0
CONTROL Charge setting of PDL job
Lv.1 Details To set charge count transmission of PDL job to the connecting
charging management device (coin manager or non-Canon-made
control card).
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: No charge, 1: Charge
Default value 0
B4-L-CNT Count setting of B4 size
Lv.1 Details To set B4 count with software counter 1 to 8 as to whether B4 is
counted as large size or small size.
Selecting 1 counts B4 or larger size paper as large size while paper
smaller than B4 size as small size.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Small size, 1: Large size
Default value 0
Related service mode COPIER> OPTION> CUSTOM> SC-L-CNT
8-142
8-142