Hdd; Main Controller Pcb 1 - Canon imageRUNNER ADVANCE C2030 Service Manual

5
Adjustment > Main Controller > Main controller PCB 1
Main Controller

HDD

Before 1) Backup of the set/registered data
Replacing Use the Remote UI.
Management Settings > Data Management > Import/Export
Target data:
• Address List
• Forwarding Settings
• Web Access Favorites
2) Printing the set/registered data
Use the service mode.
(Lv.1) COPIER > FUNCTION > MISC-P > USER-PRT
List of the set/registered data which cannot be backed up is printed."
Aftter Replacing 1) HDD format
1-1) Start with the safe mode. (While pressing 2 and 8 keys simultaneously,
turn ON the main power switch.)
1-2) Use SST to format all partitions.
2) Downloading system software
2-1) Use SST to download the system software (System, LANG, RUI and
others).
3) Initializing the key, certificate and CA certificate
(Lv.2) COPIER > FUNCTION > CLEAR > CA-KEY
4) Turning OFF and ON the main power switch
5) Restoring the backup data
Use the Remote UI.
Management Settings > Data Management > Import/Export
6) Resetting/registering the data
While referring to the list of set/registered data which was printed before
replacement, reset/register the data.
7) When the user generates and adds the encryption key, certificate and/or CA
certificate, request the user to generate them again.
Points to Note When using the HDD of the other machine (different serial number), be sure to
when Using the format the HDD after the installation. If the HDD is not formatted, the operation
HDD cannot be guaranteed.
5 Adjustment > Main Controller > Main controller PCB 1

Main controller PCB 1

Operation at Transferring the parts from old PCB to new PCB
Replacement • DDR2-SDRAM (2 pc.)
• Flash PCB
• TPM PCB
Resetting/registering the data is not necessary after Main Controller PCB 1 is
replaced.
Prohibited Do not transfer the following parts to another model (which has a different serial
Operation number).
If you fail to do so, the Main Body does not activate normally and this might cause
to fail the restoration.
• Main Controller PCB 1
• Flash PCB
T-5-1
5-2
T-5-2
5-2