Canon imageRUNNER ADVANCE C2030 Service Manual page 411

STEP 2: Update using Updater
The firmware downloaded to the device can be updated using Updater functions.
When Timing to Apply is set to [Auto] in Distribution Setting in STEP 1, the firmware is
updated automatically. Only when Timing to Apply is set to [Manual], follow the steps below to
update the firmware.
1. Start [Service Mode] at Level 1.
2. Press [Updater] button.
3. Press [Update Firmware] button.
6
Troubleshooting > Version upgrade > Version Upgrade via CDS > c. Manual Download and Update (On-site Update from Service Mode)
F-6-107
F-6-108
6 Troubleshooting > Version upgrade > Version Upgrade via CDS > c. Manual Download and Update (On-site Update from Service Mode)
4. Press [Apply Firmware] button.
5. Confirm the downloaded firmware and press [Yes] button.
6. The firmware is applied to the device. The device is automatically restarted when the
firmware is successfully applied.
6-65
F-6-109
F-6-110
6-65