Setting The Cassette - Canon imageRUNNER ADVANCE C2030 Service Manual

Setting the Cassette

NOTE:
The illustrations show the case of the Cassette 2 as an example. The Cassette 1 can
be set in the same way.
1) Press the Cassette Release button, pull out the Cassette.
2) Hold the lever of the Side Guide Plate, and adjust the plate to the specified size.
3) Hold the lever of the Trailing Edge Guide Plate, and adjust the plate to the specified size.
Rear Edge Guide Plate Lever
Rear Edge Guide Plate
4) Place paper and open the cover at insertion area of the Size Plate.
9
Installation > Installation Procedure > Setting the Cassette
Side Guide Plate
Side Guide Plate Lever
F-9-20
Paper
Cover
F-9-21
9 Installation > Installation Procedure > Setting the Cassette
5) Cut the 2 places of the Size Plates with nippers.
Cut
6) Set the Size Plate according to the size of papers being set.
(Lump the Size Plates not in use together and store them at the rear.)
7) Close the cover at insertion area of the Size Plate, and insert the cassette.
8) Set the other cassette in the same way.
9) In the case that the Cassette Pedestal is installed, set the cassettes of it in the same way.
NOTE:
Paper size settings are automatically recognized.
9-12
F-9-22
F-9-23
9-12