Canon imageRUNNER ADVANCE C2030 Service Manual page 30

1
Features/Specifications > Operation > Service mode > Enhanced I/O Information Features/Specifications
■ Description of Service Mode Items
The description of the initial screen, the main items, the intermediate items and the sub items
can be displayed.
After selecting any item of the initial screen, main item, the intermediate item or the sub item,
pressing "i" (Information Button) displays the description of the selected item (hereinafter
referred to as the service mode contents).
e.g.) COPIER > DISPLAY > Version screen
1) Press [i]
2) Minor item titles
are displayed.
3) Select the desired
minor item and
press [i]
• Displayed language of the service mode contents can be selected from J/E/F/I/G/S.
• The service mode contents can be upgraded with the SST (just like the other system
software).
1 Features/Specifications > Operation > Service mode > Enhanced I/O Information Features/Specifications
4) A detailed explanation on the
item will be displayed (usage
scenarios, instructions,
settings range, etc.).
F-1-15
■ Enhanced I/O Information
This is the mode to check signal's input/output state of electrical parts (e.g. sensor, motor,
fan) in use. In the mode COPIER > I/O, it becomes easier to find the target electrical part.
In addition, input/output state of signal can be checked on the screen.
Device classification
Electrical parts
classification
1) Press the button.
Which button to press, will depend on which
electrical parts intended and its device
classification. For instance, if the host
machine uses paper pass detection sensor,
then press the button on the "COPIER" and
"P-Sensor" position.
2) Then the selected electrical
parts classification's mark,
name, port number and 0/1
content will appear.
3) If the "i" button is pressed,the screen
displaying the electrical parts array will appear.
1-17
1-17