Canon imageRUNNER ADVANCE C2030 Service Manual page 387

■ Registering System Software
● System software storage folder to SST
Register the system software stored in the folder to SST.
NOTE:
When the system software has been compressed, decompress the compression file
and then register to SST.
Preparation
Requirements:
• PC with SST Ver.4.31 or later installed
• The system software for this machine
Steps to register the system software
1) Start the PC.
2) Start SST.
3) Click the "Register System Software" button.
6
Troubleshooting > Version upgrade > Version Upgrade using USB Memory Storage Device > Registering System Software
F-6-58
6 Troubleshooting > Version upgrade > Version Upgrade using USB Memory Storage Device > Registering System Software
4) Select the folder in which the system software is saved and click the "Search" button.
NOTE:
"XXXX" in the figure describes the version of system software.
5) A list of system software in the folder is displayed.
Deselect the checkbox of unnecessary folder(s) and/or system software and click the
"Register" button.
6-41
F-6-59
F-6-60
6-41