Canon imageRUNNER ADVANCE C2030 Service Manual page 703

COPIER > OPTION > USER
USBR-DSP Display/hide of USB infrared device driver
Lv.2 Details To set whether to display "Preferences > External Interface > USB
Settings > Use MEAP Driver for USB Infrared Device."
Use case When prohibiting the user administrator to change the setting of "Use
MEAP Driver for USB Infrared Device," set 0 after the specified setting
is completed.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Preferences > External Interface > USB Settings > Use MEAP Driver
for USB Infrared Device
POL-SCAN Display/hide of Rights Management Server set
Lv.1 Details When "1: Display" is set, the Rights Management Server function
screen is displayed.
While the Rights Management Server function is a standard feature, it
is possible to hide if not necessary.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
JA-SBOX Setting of linking with Advanced Box:SAM
Lv.2 Details To set the link with Advanced Box when iW SAM is enabled.
When 1 is set, linking with Advanced Box is enabled.
Use case When the operation restriction is cleared at the time of iW SAM
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
CSTHT-SW ON/OFF of Cassette Heater
Lv.1 Details To set ON/OFF of the Cassette Heater.
Because the host machine cannot detect ON/OFF of the Cassette
Heater hardware switch, temperature around the Process Cartridge
becomes higher than the predictive value when the switch is ON.
To correct the predictive value, set the service mode according to ON/
OFF of the Cassette Heater at the time of installation.
Use case At installation (set according to ON/OFF of the Cassette Heater)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8
Service Mode > COPIER > OPTION > USER
8 Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
EZY-SCRP ON/OFF of secure print simple auth
Lv.1 Details To set whether to conduct secure print by simple authentication.
When 1 is set, secured print, encryption secured print and inbox print
are received, but the normal print jobs are cancelled.
If the password "3758211" is entered at job sending, authentication
by entering the password on the Control Panel is not required. If the
password is not entered at job sending, authentication by entering the
password on the Control Panel is necessary at job output.
In addition, the following selection is added as auto deletion time of
secure job: 10 minutes, 20 minutes, 30 minutes
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
DMN-MTCH ON/OFF of secure print domain judgment
Lv.1 Details To set whether to display only the job which matches the domain in
the "My Job Status" screen of the secure print.
When 1 is set, only the job which matches the user name and domain
name is displayed in the "My Job Status" screen, so the job which
does not match the domain is not displayed.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
Supplement/memo In the "My Job Status" screen, the job is displayed when login service
is used. Only the job of user who logs in is displayed.
8-151
T-8-52
8-151