Check Items When Turning Off The Main Power; Installation Outline Drawing - Canon imageRUNNER ADVANCE C2030 Service Manual

[7] Cord Guide(L90) X 3 [8] Screw (TP; M3x6) X 5
[9] PCI Expansion Support Plate X 1 [10] Wireless LAN Auxiliary Plate X 1
[11] Wireless LAN Support Plate X 1 [12] Wireless LAN Support Plate X 1
9
Installation > Expansion Bus-F2/ IPSec Board-B2/ Wireless LAN Board-B2 > Installation Outline Drawing
Use 2 of them
F-9-67
9 Installation > Expansion Bus-F2/ IPSec Board-B2/ Wireless LAN Board-B2 > Installation Outline Drawing
NOTE:
*1 Be sure to keep the remaining of the 3 sheets of tape, as it might be needed for later
use.
<CD/Guides>
• FCC/IC Sheet (USA only)
• Users Manual
• Users Manual CD

Check Items when Turning OFF the Main Power

Check that the main power is OFF.
1) Turn OFF the main power switch of the host machine.
2) Be sure that Control Panel Display and Main Power Lamp are both turned OFF, and then
disconnect the power plug.

Installation Outline Drawing

9-34
F-9-66
F-9-68
9-34