Check Items When Turning Off The Main Power; Installation Outline Drawing; Installation Procedure - Canon imageRUNNER ADVANCE C2030 Service Manual

■ Heater Kit-L1
[1] Heater Connector Cover X 1
only for the Cassette of the host machine
[3] Screw
(D Tightening; M3x8) X 2

Check Items when Turning OFF the Main Power

Chek that the main power switch is OFF
1) Turn OFF the main power switch.
2) Be sure that display in the Control Panel and the lamp of the main power supply are turned
off, then disconnect the power plug.
9
Installation > Cassette Heater unit > Installation Procedure > Installing the Heater PCB
[2] Heater PCB Unit X 1
F-9-215
9 Installation > Cassette Heater unit > Installation Procedure > Installing the Heater PCB

Installation Outline Drawing

Installation Procedure

■ Installing the Heater PCB
1) Press the cassette release button, and remove the Cassettes 1 and 2.
2) Remove the Right Upper Sub Cover.
• 2 Screws
• 3 Claws
x2
9-93
F-9-216
F-9-217
9-93