Canon imageRUNNER ADVANCE C2030 Service Manual page 891

3) Install the HDD to the HDD Mount removed in step 1.
• 4 Screws (W Sems; M3x4) (included with the HDD)
NOTE:
Be sure to insert the HDD with its label side down and its connector in the direction as
shown in the figure, and align its 4 screw holes with those of the HDD Mount.
9
Installation > TYPE6:2.5inch/80GB HDD-E1/Removable HDD Kit-AE1 Installation Procedure > Installation Procedure > Installing the Removable
4) Install the HDD to the HDD Case.
• 4 Bosses
x4
F-9-338
5) Install the HDD Case Cover by pushing in the 6 claws marked with triangles.
• 1 Screw (P Tightening; M3x10) (included with the Removable HDD Kit)
9 Installation > TYPE6:2.5inch/80GB HDD-E1/Removable HDD Kit-AE1 Installation Procedure > Installation Procedure > Installing the Removable
NOTE:
When installing the HDD, be sure to keep the side from which the screws were
tightened in step 3 up.
x6
9-156
F-9-339
F-9-340
9-156