Canon imageRUNNER ADVANCE C2030 Service Manual page 667

COPIER > OPTION > DSPLY-SW
ANIM-SW Screen switch set from MEAP to warning
Lv.2 Details To set to enable/disable switching from MEAP screen to the error/jam
screen.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0: Enabled
Default value 0
Supplement/memo If just disabling the switch with MEAP-DSP, the screen is switched to
the standard screen in the case of an error/jam/alarm.
UI-PRINT Display/hide of sequre print screen
Lv.2 Details To set whether to display or hide the sequre print screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-RSCAN Display/hide of remote scan screen
Lv.2 Details To set whether to display or hide the remote scan screen on the
Control Panel.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-WEB Display/hide of Web browser screen
Lv.2 Details To set whether to display or hide the Web browser screen.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
TNR-WARN ON/OFF of toner alarm display
Lv.1 Details To set whether to display the toner alarm screen.
When "1" is set, the toner alarm is not displayed until the toner runs
out.
Use case When preferring to hide the alarm until the toner runs out
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0(other), 1(US)
8
Service Mode > COPIER > OPTION > DSPLY-SW
8 Service Mode > COPIER > OPTION > DSPLY-SW
COPIER > OPTION > DSPLY-SW
HPFL-DSP Set hvy, prntr 1200dpi dedicated mod display
Lv.1 Details To set whether to display heavy paper and printer 1200dpi dedicated
mode on Auto Adjust Gradation screen at the time of Full Adjust.
Use case When executing Full Adjust with heavy paper and printer 1200dpi
dedicated mode
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: OFF
1:Plain / Heavy
2:Standard / For Printer 1200dpi
3:Standard(Thin) / Standard(Heavy) / For Printer 1200dpi
Default value 0
RMT-CNSL ON/OFF of MEAP console screen
Lv.1 Details Selecting "1: ON" enables to obtain log for Function Composer on
console screen.
Use case When obtaining log for Function Composer
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
UI-SBOX ON/OFF of Advanced Box screen display
Lv.2 Details To set ON/OFF of the Advanced Box screen on the Control Panel.
Use case When not displaying the Advanced Box screen on the Control Panel
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0: Europe, 1: Other than Europe
UI-MEM ON/OFF of memory media screen display
Lv.2 Details To set ON/OFF of the memory media screen display on the Control
Panel.
Use case When not displaying the memory media screen on the Control Panel
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
8-115
8-115