How to Check this Installation Procedure
When Using the Parts Included in the Package
A symbol is described on the illustration in the case of using the parts included in the package
of this product.
Packaged Item
F-9-1
Symbols in the Illustration
The frequently-performed operations are described with symbols in this procedure.
Screw
Connector
Tighten
Remove
Connect
Disconnect
Claw
Insert
Remove
Push
Checking instruction
Check
Visual Check
Sound Check
9
Installation > Checking before Installation: > Checking the Installation Environment
Harness
Secure
Free
Plug in
Turn on
F-9-2
9
Installation > Checking before Installation: > Checking the Installation Environment
Checking before Installation:
Following shows requirements for the installation site.
Therefore, it is desirable to see the installation site in advance before bringing in the machine
to the user's site.
Checking Power Supply
1) There must be a power outlet properly grounded and rated as indicated (+, -10%) for
exclusive use by the machine.
Checking the Installation Environment
1) The environment of the installation site must be in the range as shown below. Avoid
installation near the faucet, water boiler, humidifier or refrigerator.
Guaranteed range for operation/image Temperature: 15.0 to 30.0 deg C, Humidity: 5 to
80%
2) The machine must not be installed near a source of fire or in an area subject to dust or
ammonium gas. If the area is exposed to direct rays of the sun, provide curtains to the
window.
3) Be sure to provide adequate ventilation of the room to keep the work environment
comfortable. Room odor can be bothering when running the machine for a long time in a
poorly-ventilated room although the ozone amount generated while running this equipment
does not harm human health.
9-2
9-2