<CD/Guide>
• Voice Guidance Kit Users Guide
• Voice Guidance Guide CD
Check Items when Turning OFF the Main Power
Check that the main power is OFF.
1) Turn OFF the main power switch.
2) Be sure that display in the Control Panel and the lamp of the main power supply are turned
off, then disconnect the power plug.
Installation Outline Drawing
9
Installation > Voice Guidance Kit-F2 > Installation Procedure
1) Remove the Right Upper Sub Cover.
• 2 Screws (The removed screws will be used in step 17.)
• 3 Claws
2) Remove the 2 screws on the Rear Upper Cover 1 and the HDD Cover, and remove the
covers by opening the Waste Toner Cover.
• 2 Screws (The removed screws will be used in step 9.)
• 4 Claws
F-9-194
9
Installation > Voice Guidance Kit-F2 > Installation Procedure
Installation Procedure
x2
x2
9-85
F-9-195
F-9-196
9-85