Canon imageRUNNER ADVANCE C2030 Service Manual page 825

18) Remove the covers of 4 Cord Guides.
19) Remove the release paper from the Cord Guides, and affix the guides to the 4 areas
indicated in the figure.
20) Put the Speaker Cable through the Cord Guides and install the covers of the guides.
x4
9
Installation > Voice Guidance Kit-F2 > Installation Procedure
F-9-211
F-9-212
9 Installation > Voice Guidance Kit-F2 > Installation Procedure
NOTE:
In the case of simultaneous installation with the Card Reader-C1, do not
install the Cord Guide to the [A] part because the Wire Saddle (included
in the package of the Card Reader) needs to be installed.
x4
9-90
[A]
F-9-213
9-90