Canon imageRUNNER ADVANCE C2030 Service Manual page 309

4
Parts Replacement and Cleaning > Disassembly/Assembly - Image Formation System - > Removing the Toner Bottle Mount (CL)
11) Disconnect the 4 connectors.
x4
12) Free the harness from the Upper Guide of the Toner Bottle Mount.
4 Parts Replacement and Cleaning > Disassembly/Assembly - Image Formation System - > Removing the Toner Bottle Mount (CL)
13) Remove the Toner Bottle Mount in the direction of the arrow.
F-4-94
Points to Note at Installation:
1) Be sure to check the position of the Toggle Lever when installing the Toner Bottle
Mount.
(If the Toggle Lever is not in the correct position, the Toner Bottle cannot be installed.)
F-4-95
2) Be sure to route the harness along the Upper Guide of the Toner Bottle Mount
without slack.
3) After installing the Link Lever, check that the Toner Bottle Door Unit opens and closes
smoothly.
4) After installation, check if the cover of Drum Unit opens and closes.
4-61
F-4-96
F-4-97
4-61