Canon imageRUNNER ADVANCE C2030 Service Manual page 396

● [1]: Disk Format
To format the entire HDD
Executing format on the machine in use deletes all the user data in the HDD as well as the
MEAP application (caution); therefore, be sure to gain agreement with the user.
Formatting is necessary when replacing a service part HDD. Note that recovery is not
available by HD-CLEAR in service mode.
CAUTION: Points to note on FLASH (memory) model
Note that reservation to execute HDD format is available even with the machine that
does not have the HDD. Do not make a reservation if the machine does not have the
HDD; otherwise, the error code E602-0002 occurs and the machine cannot be started
properly.
When the HDD format reservation is executed by mistake, enter service mode on the
screen with the E602-0002 displayed as shown below. Execute [4]: HDD OPERATION
CLEAR; and turn OFF the power to recover.
6
Troubleshooting > Version upgrade > Version Upgrade using USB Memory Storage Device > Formatting FLASH PCB or HDD
F-6-76
6 Troubleshooting > Version upgrade > Version Upgrade using USB Memory Storage Device > Formatting FLASH PCB or HDD
Operation Procedure
1) Enter download mode.
2) Connect the USB memory storage device to the USB port.
3) Press the key on the control panel.
[4] - [1] - [0]: Execute format/ any key other than [0]: Return to the menu screen
Formatting is executed when the power is turned ON the next time. The message showing
data initialization and wait time are displayed.
6-50
F-6-77
6-50